LP 200 – Automatic Grinder for Metallographic Samples
Sample Preparation for X-Ray Analysis LP 200
LP 200 is automatic electric grinder equipped with dust aspiration system designed for preparation of metallographic samples
LP 200 represents the ideal solution not only for those who have many specimens but also for operator’s safety that can carry out the operation with totally free hands without contact with the working area.
Totally hands-free operation. Ideal sample preparation solution for customers with many samples as well as for safe working environment.
The most used methods to analyze a solid-state metal material are Optical Emission Spectrometers and in some cases X-Ray Fluorescence.
Preparation of specimens must be performed in a correct manner, quickly and with the maximum security for the operator. The specimens must be homogeneous and representative, must have a flat and grinded surface with different finishing grades depending on the material to minimize the factors that may affect the results especially for the trace elements.
A manual cycle operation is available to perform occasional preparation of samples with irregular shapes.
LP 200 Automatic electric grinder with automatic sample loading and unloading allows the operator to program the entire cycle depending on the type of material to be analysed. It is possible to select the belt speed, the number of cleaning and the degree of pressure on the specimen.
The most common materials are Fe, Cu, Al, Co and others.
- Power Supply: 380 /400 Vac, 3f + T, 50/60 Hz
- Max Power: 4.3 Kw
- Air Pressure Inlet: 4.0 bar
- Minimum working pressure: 1.8 bar
- Dimensions: cm 125x63x136
- Weight: 252 Kg
- Abrasive belt: cm 20×175 cm Red Ceramic
- Maximum sample size in automatic: 12
- Sample Preparation for X-Ray analysis
- Material and Failure analysis Laboratories
