GC Sample Injection System – UNIS 2100 PTV
JAS PTV Inlet UNIS 2100
The JAS PTV inlet with a wide variety of potential uses
- S/SL, PTV, CoC and other sample injection techniques
- Maximum temperature: 450 °C
- Five cooling options available
- Compressed air
- Liquid N2
- Liquid CO2
- Peltier element cooling
- External cooling with compressed air
- Optimized for Large Volume Injection and Solvent Vent
JAS GC Sample Injection System – UNIS 2100 PTV with its special heating device, temperature ramps up to 720 °C per minute with 1° increments are possible. The PTV injector is controlled via Agilent OpenLAB Software or GC keypad.
The UNIS 2100 allows comprehensive PTV as well as S/SL, CoC and PP injection modes. It supports Solvent Vent, Large Volume Injection and other sample inlet techniques. The PTV inlet has an extended range of different cooling options: compressed air, external cooling with compressed air, liquid CO2, liquid N2 and Peltier element cooling. This provides excellent PTV capabilities down to the cryo temperature range. The Peltier cooling element is a cost-effective alternative to common cooling options as no coolant is required.